|
The Optimal Water Heater
|
|
Optimal 300, 500 litre |
The loops are kept apart and vertical for optimal heat exchange. We are using 22mm loops to achieve a lower pressure fall and larger heat exchange surface. Our preheating loop starts far down in the tank. This gives the lower bottom better layering and allows the solar panel to produce more energy per year.
The tanks are produced in three sizes: 300L, 500L, 750L. 300 and 500 litre are delivered in white or galvanised steel sheet. 750 litre is polyurethane insulated. This insulation is possible to remove.
|
300 litre
|
500 litre |
750 litre | |
| Dimensions: | 600x600x1740 mm | 740x740x1750 mm |
750x1900 mm
|
| Insulation: |
Mineral wool 70 mm |
Mineral wool 70 mm |
Polyurethane 40 mm (alt 90 mm)
|
| Total height: | 1800 mm | 1860 mm |
1945 mm
|
|
Hot tap water loop:
Pre-heating loop:
Solar heating loop:
|
Extruded coppercoils 22mm x 15 m
Extruded coppercoils 22mm x 9,5 m
Extruded coppercoils 22mm x 15 m (9,5 m) |
Extruded coppercoils 22mm x 15 m
Extruded coppercoils 22mm x 9,5 m
Extruded coppercoils 22mm x 15 m (9,5 m) |
Extruded coppercoils 22mm x 15 m
Extruded coppercoils 22mm x 9,5 m
Extruded coppercoils 22mm x 15 m (9,5 m) |